Cisco Meraki

A Cisco Meraki management station must be installed before adding any Meraki Network devices. All Meraki Network devices will be auto-discovered by the management station.

After a device has been discovered by its management station, you can open the device properties to adjust settings.

• On the toolbar, click Device > Devices and click the device name in the All Devices list.

Enable Logging

1. You must first enable logging in the Cisco Meraki Dashboard.

2. Open the Log Monitoring section.

3. Verify that the Enable Log Monitoring check box is selected.

4. Optional. Enter an Alternate Syslog Source IP address in the box.

5. By default, the Log Update Interval is set to 10 minutes.

6. Click Save.