NAT Rules Table

The following table defines the values in the NAT Rules table. The order of rules listed in the NAT table is set in the firewall policy by the network administrator.

The columns under the Original heading show the source, destination, and service of a rule before either the source or destination was translated. Only the source OR the destination IP address will be translated. The columns under the Translated heading show the source, destination, and service after either the source or destination have been translated. In most cases, the service should not change.

NAT Rules

Value	Description
Rule Summary
Rule	The rule that governs traffic to or from an NAT rule.
Policy	The policy for the NAT rule.
Device	The device the NAT rule belongs to.
Original
Source	The source IP address of the rule before it is translated. Either this value or the destination IP address will translated.
Destination	The destination IP address of the rule before it is translated.
Service	The protocol and port the rule uses to filter network traffic.
Translated
Source	If translated, the new IP address. If not, the original IP address.
Destination	If translated, the new destination IP address. If not, the original destination IP address.
Service	The protocol and port the rule uses to filter network traffic. This should be the same protocol and port as the original service.